Full potting 1500V good quality split junction box PV-BN3H1A

Short Description:

This solar junction box adopts full Potting-glue, waterproof, and has been certified by TUV. This product is a high-heat dissipation and high-power junction box developed for 166,182,210, heterojunction and other crystal silicon high-efficiency half cell PV module.The copper bridge and diode are welded by DC resistance spot welder,which can make the copper bridge and diode pins fuse together,and the contact resistance is almost zero,reducing the power loss of the PV module.The diode pin falls off from the copper bridge without the influence of high temperature caused by welding strip.Compared with the modular junction box on the market,this product can increase the passing current by about 10%under the same conditions of diode chip,and the junction temperature is lower.

Send email to us

Product Detail

Product Tags

Description

1,This solar junction box adopts full Potting-glue, waterproof, and has been certified by TUV. This product is a high-heat dissipation and high-power junction box developed for 166,182,210, heterojunction and other crystal silicon high-efficiency half cell PV module.The copper bridge and diode are welded by DC resistance spot welder,which can make the copper bridge and diode pins fuse together,and the contact resistance is almost zero,reducing the power loss of the PV module.The diode pin falls off from the copper bridge without the influence of high temperature caused by welding strip.Compared with the modular junction box on the market,this product can increase the passing current by about 10%under the same conditions of diode chip,and the junction temperature is lower.
2,This product uses more mature and stable technology R6 package high-power Schottky diode,diode pin is 1.3mm and 2.0mm (according to the power and current size of the PV module).
3,Mini design:this junction box is suitable for back connection of solar module,small and compact,with clean adhesive path on the back plate and less adhesive ,which is conducive to the transportation of customer PV module after installation.

Technical data

Rated voltage	1500V	Flame Class	UL94-V0 (TUV)/5VA(UL)
Rated current	30A	Cable Specifications	4mm²
Operating temperature	-40°C-+85°C(TUV)/-40°C-+90°C(UL)	Waterproof Structure	Potting
Safety class	Class II	Waterproof rating	IP68
Application level	Class A	Potting Glue quantity	8g X 3
Maximum bus bar width	8mm	Busbar connect ion	Soldering
Insulation Material	PPE	Contact Material	Copper,Tin-Plated ，

Product Configuration List

Diode Rated Voltage	30A
Diode Type	SB5045
Diode Qty	3

Application

Unshielded solar panels for thin film batteries to improve solar energy

Solution

● PV module’s ribbon alignment must be complied with JB’s mounting hole of the terminal base.

● Adhesive and sealing compound, Potting glue must be applied by using specific type and specification. Make sure JB will be fixed in the correct position and reliable sealant. The potting glue level should be over the top surface of Diodes and terminal base. In order to avoid electrical shock risk.

● Don’t move PV module or JB before adhesive and sealing compound or potting glue solidify.

● Ensure soldering between Ribbons and terminal reliably in order to avoid missing soldering or false soldering. The soldering operators must be professionally trained. More soldering time will cause the diodes damaged.

● Adopt anti-static protection solutions when touch or solder JB.

● Make sure the connection method between JB and PV module in the correct polarity. Otherwise, Wrong connection will cause fire.

● PV module manufacturer should inspect the diodes of JBs before shipment since the diodes might be damaged by heat temperature or the static shock.

● Installation or maintenance should be operated by the professional personnel.

● For protection against electric shock, while being assembled or disassembled, make sure connectors isolated from the power supply.

● Don’t connected or disconnected under load.

● During the assembly process, keep the connector away from any corrosive materials.

Why Choose Us

We are a direct manufacturer, we can provide customers with customized, high quality, competitive price products. We have a good reputation among our peers and customers. At the same time we have more perfect after-sales service, to solve everything for customers.

FAQ

1) Are you a factory or trading company?
We have our own factories.

2) What is your FOB port?
FOB Shanghai, and we can according to customer requirements.

3) What is your delivery time?
3-7 days for samples, 10-30 days for large quantities, according to your order.

4) How about your after-sale service?
We can offer you timely and best after-sales service. Now we have built our relationship in many overseas countries like Brazil, Pakistan, Japan and German. It makes our after-sale service very easy and effective to reach you. Also our 24 hours online inquiry service is available.

5) Can I have my own logo on your products?
Yes, OEM&ODM service is available.

6) How to guarantee the quality of your products?
Our products have U L, TUV, IEC, RoHs, SGS and other certifications.

Previous: 1500V high quality split junction box PV-BN3H1

Next: Competitive price 1500V good quality split junction box PV-BN3H1B

Write your message here and send it to us